Description
The WaterSentinel WSG-1 replacement filter is an alternative/compatible filter for the refrigerator water filter. The WSG-1 fits any refrigerator that currently uses the GE MWF The WSG1 fridge filter is also compatible with the following part numbers: GE MWF, GWF, MWFA, GWFA, GWF06 Kenmore 46-9991, 469991 Hotpoint HWF, HWFA Specifications Filter Life : 6 months or 300 gallons (whichever comes first) Flow Rate : 0.5 gallons per minute Operating Temperature : 33-100°F Country of Origin : Made in USA Filter Replacement Instructions Remove the old filter by slowly turning the cartridge 1/4 turn to the left Remove all packaging, including the protective sticker at the top Make sure the o-ring is in place in top of the filter Fill the filter with water Insert the filter into refrigerator and turn 1/4 to 1/2 turn to the right (label will be in front) - Do not over-tighten Run water for 5 minutes through the dispenser to flush and condition the filter Reset the “Reset Filter” light, if applicable, by holding down the button for 3 seconds